Download Commodity

Download Article

Vinyl is a strong material that can resist the damage and deterioration caused past the sun's ultra-violet rays. With proper care and maintenance, vinyl windows tin remain in great shape for years. Considering the drinking glass scratches so easily, caution must exist shown when cleaning the surface. Only mild non-detergent soaps and microfiber cloths should exist used. Utilise a UV protectant product after every cleaning to extend the life of your windows.

  1. 1

    Rinse off dirt and debris with clean water. Vinyl windows can exist easily scratched and discolored, and so caution is needed when cleaning them. Use fresh, clean h2o to rinse off any loose particles and dirt from the surface by gently pouring water from a pitcher or wringing it out of a clean wet rag. Avoid wiping droppings-covered windows without rinsing them starting time.

    • To avert scratching, yous should also remove any rings, bracelets and watches yous're wearing earlier you lot begin. These tin puncture the vinyl.[1]
    • Avoid cleaning the drinking glass in directly sunlight.

  2. 2

    Create a cleaning mixture with non-detergent soap and warm water. Mix together ¼ loving cup (30 milliliters) of mild, not-detergent soap (such every bit Woolite, Dreft or Murphy Oil Soap) and a gallon (iii.79 liters) of warm water in a large saucepan.

    • Never use alcohol or ammonia based products, Windex, dishwashing detergents or whatever other cleaning products that contain annoying chemicals.
    • If used, these substances will damage the vinyl (and about likely void your warranty, likewise).[2]

    Advertizing

  3. three

    Wipe downwardly the surface with a microfiber towel. Dip a microfiber towel into the saucepan of cleaning solution, so wring it out. Wipe the surface with the microfiber cloth, working from left to right (or right to left) consistently. As you wipe, use very little pressure level to avoid scratching. Piece of work apace; don't permit the cleaning solution to sit down on the surface for any longer than necessary.[three]

    • Never use paper towels, household sponges or other abrasive cloths to wipe down the console. These materials will scratch the surface.

  4. 4

    Rinse the surface thoroughly with clean water. After wiping the panels down with the cleaning mixture, take a clean microfiber cloth and soak it with fresh, clean water. Wipe the surface down thoroughly to rinse away the cleaning solution. Work from left to right (or right to left) consistently as you rinse the surface.

    • Never apply a loftier pressure nozzle to rinse off your windows.

  5. v

    Dry out the surface completely with a soft absorbent cloth. To prevent water spots from developing, use another lint-free cloth to dry the surface thoroughly. Brand sure you employ a soft absorbent cloth or towel to avoid scratching the panels.

    Advertisement

  1. i

    Vacuum the panel frame with a soft castor attachment. Use the brush attachment to thoroughly vacuum all around the panel frame, windowsill and, if applicable, downwards into the metal tracks. Be sure to pay attending to the nooks and crannies so that you remove all loose clay and debris.

  2. ii

    Create a cleaning solution of balmy dish soap and warm water. [4] Mix together ¼ cup (30 milliliters) of mild, not-detergent soap and a gallon (iii.79 liters) of warm water. Make certain yous're using a soap that is very mild and not-abrasive to prevent any impairment to your window frames. Ivory dish soap and Woolite are two examples of mild cleansers you tin can apply for this.

    • Never use bleach products or any other cleaning agents with abrasive chemicals.[5]

  3. 3

    Dip a soft cloth into the cleaning mixture. Wring out the excess solution from the fabric. Gently wipe downward your window frames to remove dirt and smudges. Work quickly so that the cleaning solution doesn't spend any longer than necessary on the frames.

    EXPERT TIP

    Bridgett Price is a Cleaning Guru and Co-Owner of Maideasy, a maid service company that services the Phoenix, Arizona metropolitan surface area. She holds a Master of Management from the University of Phoenix, specializing in digital and traditional marketing.

    Bridgett Price

    Bridgett Toll
    House Cleaning Professional

    Endeavour using a toothbrush to get a detailed clean. When you're cleaning vinyl windows, dip a toothbrush in dish soap and h2o, so scrub away any congenital-up clay with a circular motion. You can as well use the toothbrush to clean in between the grooves of the vinyl.

  4. 4

    Rinse with clean water and dry out completely. Soak a fresh cloth in clean water and rinse away the cleaning solution yous've applied to the frames. Once the frames are soap-free, use a soft dry cloth to thoroughly wipe down the surface. Make certain you lot dry the surface completely.

    Advertisement

  1. 1

    Apply a UV protectant to the glass after each cleaning. Vinyl polish and UV protectant products will go along the panels crystal articulate and forestall the sun from dissentious the surface. You volition extend the life of your vinyl windows by using these products after each cleaning.[6]

    • Follow the manufacturer's directions for the particular product you're using, since application techniques may vary from product to product.

  2. two

    Clean your windows at to the lowest degree twice per year. Vinyl windows are fabricated of very resilient materials that can withstand deterioration that sunlight causes over time. To keep them in tip-acme shape, clean your vinyl windows at minimum twice per year. If your windows have become especially dirty after a storm or for another reason, try to make clean them up as soon equally possible.[7]

  3. iii

    Avoid using any and all abrasive materials. Never use petroleum-based cleaners, caustic chemicals, razor blades, putty knives, abrasive pads, paper towel, or high-pressure water hoses on your vinyl windows.

    Advertising

Add New Question

  • Question

    What tin can I use on my vinyl windows to make them open easier?

    Annie

    If the hinges (or tracks) are metal and rusty, try a lubricant similar WD-40. If they don't seal or open properly, try to check if the condom or tracks effectually the frame are muddy from dust, leaves, clay, etc. You can apply an sometime toothbrush or something like to get the grime out. If the handle is sticking, WD-40 volition again help.

Enquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

References

Well-nigh This Article

Thanks to all authors for creating a folio that has been read xl,476 times.

Did this commodity help you lot?